DIY

Slatted Wood Dresser

– Kwik Wood – Drawer Stops – Krud Kutter – Wood Filler – SurfPrep Sander 3×4 vacuum compatible – 220 Grit Sandpaper – 400 Grit Sandpaper – 150 Grit Sandpaper – Shop Vac – Tack Cloth – Clear Shellac in a Spray Can

Supplies needed:

Before

This is what we started with.

Remove Paint from Last Project

Step 1:

Make Repairs, Clean and Fill Hardware Holes

Step 2:

Add Wood to the Drawers to Make Slatted Drawers

Step 3:

Fill Holes and Sand

Step 4:

Prime

Step 5:

Add Paint to Paint Sprayer and Thin Out Paint

Step 6:

SWIPE UP TO SEE FULL INSTRUCTIONS!